Model/Brand/Package
Category/Description
Inventory
Price
Data
-
![]()
Category: surge protectionDescription: OVR Type 1 Surge Protection Device for TNC 230V Network - System Pro M Compact OVR Type 1 Surge Protection Device comes with a status indicator light that can change from green to red at the end of the device's service life. The System Pro M also has a safety reserve system, where when the surge current exceeds the maximum capacitance of the device, the surge protection device will switch to the safety reserve position and the remote indicator light (TS) will switch to the defect. Therefore, users can be warned in advance to have more time to replace the sleeve. Because in the safety reserve position, with the help of a two-stage disconnect system, safety protection can still be ensured. The Pro m compact system is a plug-in device that facilitates maintenance in the event of sleeve failure due to power surges and lightning events. Therefore, replacing the spare sleeve does not require isolating the circuit or disconnecting any related wiring. The auxiliary contact (TS) function is executed by a 3-point 1A voltage free contact, which can remotely check the operating status of surge protection equipment. The applications of System Pro M include green energy systems for solar and wind turbines. ###Surge protection equipment, SPD (DIN rail) voltage surge is often referred to as peak or transient overvoltage, which is usually caused by switch fluorescent lamps, fuse burnout, or nearby lightning activity. The worst voltage surges are usually caused by lightning, with voltages up to 6000V and current surges exceeding 3000A. The maximum value of voltage and current surges caused by lightning strikes depends on the location within the building's wiring system. BS7671: First revised edition in 2011, sections 443 and 534 cover risk assessment and provide guidance on electronic device protection for installation engineers to follow. The BSEN 62305 standard series provides the most comprehensive information on lightning and surge protection.73831+$1475.009810+$1461.600625+$1454.896050+$1448.1914100+$1441.4869150+$1434.7823250+$1428.0777500+$1421.3731 -
![]()
Category: Classification of electronic componentsDescription: ABB OVR The series suggests using these surge protection devices in locations that can fully expose to lightning, such as light source entrances in buildings protected by lightning rods or powered by antennas. These products are installed at the entrance of the installation location (such as the main distribution board). Simple DIN rail installation IP20 protection working temperature range: -40 ° C →+80 ° C # # # Industrial circuit protection82871+$2446.042510+$2423.805825+$2412.687450+$2401.5690100+$2390.4506150+$2379.3323250+$2368.2139500+$2357.0955 -
![]()
Category: Classification of electronic componentsDescription: Surge arrestor; Type 2; Poles no:3+N; 255VAC; Mounting: DIN; IP2055601+$1068.608610+$1031.113650+$1026.4267100+$1021.7398150+$1014.2408250+$1007.6792500+$1001.11761000+$993.6186 -
![]()
Category: Classification of electronic componentsDescription: Surge arrestor; Type 2; Poles no:1+N; 255VAC; Mounting: DIN; IP2040061+$1452.132010+$1438.930825+$1432.330250+$1425.7296100+$1419.1290150+$1412.5284250+$1405.9278500+$1399.3272 -
![]()
Category: Classification of electronic componentsDescription: Surge arrestor; Type 2; Poles no:3; 255VAC; Mounting: DIN; IP2085231+$691.912710+$667.635150+$664.6004100+$661.5657150+$656.7102250+$652.4616500+$648.21301000+$643.3575 -
![]()
Category: Classification of electronic componentsDescription: Surge arrestor; Type 2; Poles no:1+N; 255VAC; Mounting: DIN; IP2086841+$654.069310+$631.119550+$628.2508100+$625.3821150+$620.7921250+$616.7759500+$612.75971000+$608.1697 -
![]()
Category: Classification of electronic componentsDescription: MISTRAL65 This new series of MISTRAL65 distribution boxes allows almost any type of distribution system to be used in industrial, commercial, and residential environments. The distribution box is made of halogen-free thermoplastic material and is completely recyclable. This series comes with transparent or opaque doors that can be opened 180 °, with 4 to 72 modules to choose from, meeting the latest regulatory requirements and ensuring suitability for a wide range of application types. This exquisite design has certain features, such as perfect symmetry that allows the entire distribution box or just the front panel to rotate, making it easy to change the opening side of the door. In multi row models, the center distance range of DIN rails is 150 mm to 125 mm, which can further enhance the versatility of the product and use the same standard accessories. This framework can be pulled to achieve fast and simple workbench cable routing. Adequate internal space makes it easier for cables to come into contact, effectively facilitating cable routing and securing cable ports to special viewing holes in the frame. The distribution box is designed to apply two different color schemes to the housing of optional dedicated terminal blocks, in order to achieve fast and tidy cable routing while ensuring easy identification of individual power sources during use. This series can be fully compatible with ABB MCB and MCCB, and can be easily installed by simply moving the rails provided for its casing. The project design also aims to optimize the cable routing, assembly, and installation time of the distribution box. The design of the entire product aims to make the work of installers faster and simpler, enabling them to create a practical and tidy distribution panel. The box door can be opened 180 degrees to facilitate full access to the internal devices of the distribution box. The symmetrical blue transparent door at the front allows for completely reverse opening. The box door adopts an ergonomic handle with a snap in closure1807 -
![]()
Category: Classification of electronic componentsDescription: TMAX LP SOR-C 24-30VDC T4-T638111+$1605.956010+$1591.356425+$1584.056650+$1576.7568100+$1569.4570150+$1562.1572250+$1554.8574500+$1547.5576 -
![]()
Category: Classification of electronic componentsDescription: Tmax ABB's Tmax series of molded case circuit breakers offers a complete range of molded case circuit breakers, covering current ratings from 15A to 2500A and interruption ratings up to 150 kA at 480 V. Models may vary due to some having terminal blocks and others not having connectors. The possibility of standardizing the 45mm front and 70mm deep assembly of 1-pole and 3-pole fixed molded case circuit breakers on substrates or DIN rails for single flange doors of cabin doors. The standard copper cable terminals on T1 and the front terminal of T3 are operated in the forward direction, complying with IEC 60417-2 double insulation to ensure isolation and IEC 60947-2 ABB distribution boards, MCCBs, and accessories39121+$787.532510+$759.899850+$756.4457100+$752.9916150+$747.4651250+$742.6294500+$737.79361000+$732.2671 -
![]()
Category: Classification of electronic componentsDescription: TOL, AS/L, B/C, CLASS-10, 0.74-1A85311+$203.162510+$197.862650+$193.7993100+$192.3860200+$191.3260500+$189.91271000+$189.02942000+$188.1461 -
![]()
Category: Classification of electronic componentsDescription: Spec-Kon® Polyamide 6.6 cable buckle, black, UV resistant ABB Spec kon ® Polyamide 6.6 standard, black, UV resistant cable ties are available in various lengths (100 to 912 mm) and tensile strengths (80 to 780 N). Polyamide 6.6 material temperature range -40 ° C to+85 ° C flammability rating UL94V-2 halogen-free and silicon free cable tie - nylon84895+$32.905150+$31.4989200+$30.7114500+$30.51451000+$30.31772500+$30.09275000+$29.95217500+$29.8114 -
![]()
Category: Classification of electronic componentsDescription: Spec-Kon® Polyamide 6.6 cable buckle, natural color ABB Spec kon ® Polyamide 6.6 standard cable ties are particularly suitable for control panel applications. The cable is halogen-free and silicon free, with a natural color. ###Features and advantages: Polyamide 6.6 material, temperature range -40 ° C to+85 ° C, flammability rating UL94V-2 halogen-free and silicon free, standard UL 94 V-2, cable tie - nylon58171+$288.280910+$280.760550+$274.9949100+$272.9894200+$271.4854500+$269.47991000+$268.22652000+$266.9731 -
![]()
Category: Classification of electronic componentsDescription: DC DC CONVERTER 12V 15W63451+$177.080510+$172.461050+$168.9194100+$167.6875200+$166.7636500+$165.53171000+$164.76182000+$163.9919 -
![]()
Category: Classification of electronic componentsDescription: Module DC-DC 48VIN 1-OUT 12V 1.2A 6-Pin Bag92591+$175.441710+$170.865050+$167.3561100+$166.1357200+$165.2203500+$163.99991000+$163.23712000+$162.4743 -
![]()
Category: Contact blockDescription: ABB CA4-10 Switch contact block, AF09-AF38 and NF Contactors, 6 A, 690 V, 600 V, tightened, 1 position81691+$59.001910+$56.4366100+$55.9748250+$55.6157500+$55.05131000+$54.79482500+$54.43575000+$54.1278 -
![]()
Category: terminal blockDescription: ABB 1SSS889204R3200 Wire-To-Board Terminal Block, 9.53mm, 4 Ways, 20AWG, 10AWG, 4mm², Push In Lock4838 -
![]()
Category: Classification of electronic componentsDescription: Modular 3POS Selector Switch Head LongHandle Black Spring Return to Centre42881+$81.650010+$78.1000100+$77.4610250+$76.9640500+$76.18301000+$75.82802500+$75.33105000+$74.9050 -
![]()
Category: Classification of electronic componentsDescription: Selector Switch, 3POS Maint, Op Onl Non-Ill, 22mm Mounting, Blk Lever, Operator Only, Black Plastic Bezel94231+$74.086510+$70.8653100+$70.2855250+$69.8345500+$69.12591000+$68.80382500+$68.35285000+$67.9663 -
![]()
Category: Classification of electronic componentsDescription: Modular 2Position Selector Switch HeadLong Handle Black Latching65531+$72.966410+$69.7939100+$69.2229250+$68.7787500+$68.08081000+$67.76352500+$67.31945000+$66.9387 -
![]()
Category: Classification of electronic componentsDescription: Selector Switch, 3Position, Non-Illuminated, 1 NO + 1NC, Momentary, Black32081+$140.734710+$137.063450+$134.2487100+$133.2696200+$132.5354500+$131.55641000+$130.94452000+$130.3326 -
![]()
Category: Classification of electronic componentsDescription: Selector Switch Operator, 2POS Main Non-Ill, 22mm Mounting, Blk Knob, Black Plastic Bezel, 10 & 2POS's23351+$108.893510+$104.1590100+$103.3068250+$102.6440500+$101.60241000+$101.12892500+$100.46615000+$99.8980 -
![]()
Category: Switch accessoriesDescription: ABB The fuse type load switch OS and OSM series are used together. Please refer to example inventory number 710-0582 and series. ###The ABB OS series fuse type isolating switch provides cost-effective short-circuit protection and circuit isolation methods. The rated value of the selected fuse determines the level of protection, and the maximum value is determined by the fuse type isolating switch. These items have been tested according to EN 60947-3 standard.80701+$166.508510+$162.164850+$158.8346100+$157.6763200+$156.8076500+$155.64931000+$154.92532000+$154.2014 -
![]()
Category: Classification of electronic componentsDescription: 2POS SW MAIN B-C ILL KNOB 1NO54201+$268.098410+$261.104550+$255.7425100+$253.8775200+$252.4787500+$250.61371000+$249.44802000+$248.2824 -
![]()
Category: Chassis, universal boxDescription: ABB SRX The SRX casing is made of AISI 304 stainless steel, designed to provide high standards of protection and strength, as well as a very high level of hygiene. They are particularly suitable for the following environments: food, chemical and pharmaceutical industries, and hospital departments. ATEX certification (Ex ll 3 G D) IP66 protection (IEC EN 60529) NEMA 4X (UL standard) IK10 external mechanical shock protection (IEC 62262) Floor or wall mounted normal working conditions: -25 to+55 ° C # # # Note that the enclosure * * does not have * * cable entry flanges or inner doors. ###Standard IEC EN 62208, IEC EN 60439-1, IEC 61439-1-2 certified UL (Underwriters Laboratories) Ex # # # comes with AISI 304 stainless steel casing, with ordinary doors and galvanized sheet metal bottom plate. ###Steel plate wall installation box26241+$2088.191610+$2069.208025+$2059.716350+$2050.2245100+$2040.7327150+$2031.2409250+$2021.7491500+$2012.2574 -
![]()
Category: Chassis, universal boxDescription: MISTRAL65 This new series of MISTRAL65 distribution boxes allows almost any type of distribution system to be used in industrial, commercial, and residential environments. The distribution box is made of halogen-free thermoplastic material and is completely recyclable. This series comes with transparent or opaque doors that can be opened 180 °, with 4 to 72 modules to choose from, meeting the latest regulatory requirements and ensuring suitability for a wide range of application types. This exquisite design has certain features, such as perfect symmetry that allows the entire distribution box or just the front panel to rotate, making it easy to change the opening side of the door. In multi row models, the center distance range of DIN rails is 150 mm to 125 mm, which can further enhance the versatility of the product and use the same standard accessories. This framework can be pulled to achieve fast and simple workbench cable routing. Adequate internal space makes it easier for cables to come into contact, effectively facilitating cable routing and securing cable ports to special viewing holes in the frame. The distribution box is designed to apply two different color schemes to the housing of optional dedicated terminal blocks, in order to achieve fast and tidy cable routing while ensuring easy identification of individual power sources during use. This series can be fully compatible with ABB MCB and MCCB, and can be easily installed by simply moving the rails provided for its casing. The project design also aims to optimize the cable routing, assembly, and installation time of the distribution box. The design of the entire product aims to make the work of installers faster and simpler, enabling them to create a practical and tidy distribution panel. The box door can be opened 180 degrees to facilitate full access to the internal devices of the distribution box. The symmetrical blue transparent door at the front allows for completely reverse opening. The box door adopts an ergonomic handle with a snap in closure94891+$594.768810+$573.899750+$571.2911100+$568.6824150+$564.5086250+$560.8565500+$557.20441000+$553.0306 -
![]()
Category: Switch accessoriesDescription: ABB Single light block on modular series guided equipment (for front installation). The BA 9s base is suitable for maximum 2 W, 230 V AC and DC filament bulbs or LED # # # ABB 22 mm modular series ABB modular series guiding equipment, including controllers, supports, contact blocks, and various accessories.34541+$48.815910+$46.0150100+$43.9343250+$43.6142500+$43.29411000+$42.93392500+$42.61385000+$42.4138 -
![]()
Category: AC-DCconverterDescription: ABB 1SVR427024R0000 AC/DC power supply, DIN rail, switch mode, fixed/adjustable, 85 V, 264 V, 135 W, 24 V, 5 A89901+$1423.378010+$1410.438225+$1403.968350+$1397.4984100+$1391.0285150+$1384.5586250+$1378.0887500+$1371.6188 -
![]()
Category: Rotary-switchDescription: 300 V Working current 10 A Switching frequency 150 Maximum cable cross-section (solid/twisted) 1.5mm2 Working temperature -30 ° C →+70 ° C # # # Standard IEC60947-4 # # # ABB Camline ABB's series of compatible cam switches can be used for panel construction, HVAC, and motor control applications.39351+$231.903310+$225.853650+$221.2155100+$219.6023200+$218.3924500+$216.77911000+$215.77092000+$214.7626
